i Safety Instructions
i
-
2
i-2
Danger Classifications & Position of Hazard warning Labels
To help you recognize the hazards, the unit utilizes special graphics to indicate different hazards. Confirm the
contents of the hazards and the location of the labels before operation.
Warning
•
Only properly trained, qualified personnel are allowed to perform tasks such as:
Operation, installation, relocation of equipment and maintenance works.
•
Should any problem occurs, address it according to instruction in this manual.
•
Identify problems following the guidelines in Chapter 5 for Troubleshooting before
proceed with maintenance works.
•
The equipment should not be turn on in the event of any problems.
When the equipment gets out of order, shutdown immediately, and contact for
service
i-2-1
Danger
Classifications
Specific danger classification of this equipment is as follows.
Hazard of Electricity
Since this equipment operates with high voltage, there is the danger of electric
shock. This special symbol is used, along with key words:
“CAUTION”
,
“WARNING”
or
“DANGER”,
on the equipment and in this manual.
Hazard
of Hot Surface
Since this equipment becomes hot while running, there is the danger of burn injury.
This special symbol is used, along with key words:
“CAUTION”
,
“WARNING”
or
“DANGER”,
on the equipment and in this manual.
Hazard of Rotor
Since this equipment has parts that rotate at high speed while running, there is the
danger of bodily injury. This special symbol is used, along with key words:
“CAUTION”,
“WARNING”
or
“DANGER
”,
on the equipment and in this manual.
