7 Specification for Option K
7 - 1
7 Specification for Option K
This product mounts the auto drain in Item 2 Specifications. When performing the installation and
maintenance of the product, the following points must be understood and followed. Additionally, for
replacement work, read 4-2 “Periodical Maintenance” of the Operation Manual of standard product and
keep safety.
7-1
Safety
instructions
When handling the product, take care to the following precautions.
Warning
1. Do not remove the auto drain if air pressure remains of the product. When removing the
auto drain, stop the supply of air to the primary side of the product, exhaust the air from the
secondary side and ensure there is no residual pressure. If the air pressure is left at the
inside of the product, parts could suddenly pop out and cause accident when loosened.
2. Put gloves to prevent injury when removing the auto drain.
3. Operator could touch the drain waste from repalced auto drain. Follow the procedures
prepared by the customer to keep safety of operators. (Ex. Put protective goggles, apron
and/or gloves to protect body from toucing the drain waste for replacement worken
replacing the product.)
