SMC Networks EZ Connect Vision SMCWIPCAM-PZ, Руководство пользователя

Страница: 27 / 59

25
z
Listen allows you to receive the on-site sound and voice from the camera.
z
Trigger Out allows you to trigger on/off the GPIO output manually.
NOTE: If your PC use Microsoft Vista platform. Maybe you can’t find these recorded files what
stored by Snapshot or Manual Record . That you need to disable the protected mode of
Security in the IE Browser. Please follow as below Steps:
1. Open IE Browser
2. Select Tools
Æ
Internet Options
3. Select Security
4. Disable the ” Enable Protected Mode ” then press OK
To view the recorded file under Windows Media Player, please install MPEG4 codec
freeware (divX or Xvid) at first.
3.3 Configuring the IP Address of the PC
If you are failed to access to the camera, please check the IP address of your
computer. When you connect the camera to your computer directly to proceed
with configuration of the camera, you need to set up the IP addresses to be in
the same segment for the two devices to communicate.
1. On your computer, click Start > Control Panel to open the Control Panel
window.
2. Double-click Network Connection to open the Network Connection window.
3. Right-click Local Area Connection and then click Properties from the
shortcut menu.
4. When the Local Area Connection Properties window appears, select the
General tab.
5. Select Internet Protocol [TCP/IP] and then click Properties to bring up the
Internet Protocol [TCP/IP] Properties window.
6. To configure a fixed IP address that is within the segment of the camera,
select the
Use the following IP address option. Then, enter an IP address
into the empty field. The default IP address is 192.168.2.10 , and the
suggested Subnet mask is 255.255.255.0 .
7. When you are finished, click OK .