SMC Networks EX250-SPR1, Руководство по эксплуатации

Страница: 10 / 31

-9-
No.EX
※※
-OME0014-F
Mounting and Installation
■ Installation
Not having mounting hole, it can’t be set to BUS independently. Be sure to connect manifold to SI unit for
setting.
And if Input block is unnecessary, connect End plate directly to SI unit.

: The size when connecting Bus Tee with the SI unit directly.
For example, the table below shows the size when manifold of VQC1000 series connected.
Please refer to an individual catalog for the size when other manifolds are connected.
L
0 1 2 3 4 5 6 7 8
L1
45 55.5 66 76.5 87 97.5 108 118.5 129
L2
89.8 110.8 131.8 152.8 173.8 194.8 215.8 236.8 257.8
L
9 10 11 12 13 14 15 16
L1
139.5 150 160.5 171 181.5 192 202.5 213
L2
278.8 299.8
Wiring (for power supply, communication and input) and piping are done on only one side.
On the side, make a space for wiring and piping.
n_m
n_m