SMC Networks C M2 Z Series, Руководство по эксплуатации

Страница: 8 / 28

- 7 -
2) Avoid having a large gap between the clevis or trunnion and mating
bushing, as this exposes the pin to a bending load.
3) Do not let foreign matter such as cutting chips get into the product
from the suction port.
4) Do not touch the cylinder during high speed and high frequency
operation.
When the cylinder is operating at a high speed and high frequency, the cylinder tube
surface temperature increases, and may cause a burn.
5) Do not use the air cylinder as an air-hydro cylinder.
If working fluid of the air cylinder is turbine oil, oil leakage can result.
6) Grease is applied to cylinder.
7) The base oil of grease may seep out.
The base oil of grease in the cylinder may seep out of the tube, cover, crimped part or
rod bushing depending on the operating conditions (ambient temperature 40
o
C or more,
pressurized condition, low frequency operation).