SMC Networks 8648T - annexe 1, Руководство по управлению

Страница: 354 / 556

C
OMMAND
L
INE
I
NTERFACE
4-110
Command Mode
Global Configuration
Example
dot1x timeout re-authperiod
This command sets the time period after which a connected client must be
re-authenticated.
Syntax
dot1x timeout re-authperiod seconds
no dot1x timeout re-authperiod
seconds - The number of seconds. (Range: 1-65535)
Default
3600 seconds
Command Mode
Global Configuration
Example
dot1x timeout tx-period
This command sets the time that the switch waits during an authentication
session before re-transmitting an EAP packet. Use the
no form to reset to
the default value.
Syntax
dot1x timeout tx-period seconds
no dot1x timeout tx-period
seconds - The number of seconds. (Range: 1-65535)
Console(config)#dot1x timeout quiet-period 350
Console(config)#
Console(config)#dot1x timeout re-authperiod 300
Console(config)#