SMC Networks 8648T - annexe 1, Руководство по управлению

Страница: 104 / 556

C
ONFIGURING THE
S
WITCH
3-56
Web – Select Security, 802.1x, Configuration. Enable dot1x globally for the
switch, modify any of the parameters required, and then click Apply.
Figure 3-24. 802.1x Configuration
CLI – This enables re-authentication and sets all of the global parameters
for 802.1x.
Configuring Port Authorization Mode
When dot1x is enabled, you need to specify the dot1x authentication mode
configured for each port.
Command Attributes
• Status – Indicates if authentication is enabled or disabled on the port.
• Operation Mode – Allows single or multiple hosts (clients) to connect
to an 802.1X-authorized port. (Range: Single-Host, Multi-Host;
Default: Single-Host)
Console(config)#dot1x re-authentication 3-109
Console(config)#dot1x max-req 5 3-106
Console(config)#dot1x timeout quiet-period 40 3-109
Console(config)#dot1x timeout re-auth 5 3-110
Console(config)#dot1x timeout tx-period 40 3-110
Console(config)#authentication dot1x default radius 3-106
Console(config)#