SMC Networks 8648T - annexe 1, Руководство по управлению

Страница: 259 / 556

L
INE
C
OMMANDS
4-15
line
This command identifies a specific line for configuration, and to process
subsequent line configuration commands.
Syntax
line { console | vty }
• console - Console terminal line.
• vty - Virtual terminal for remote console access (i.e., Telnet).
Default Setting
There is no default line.
Command Mode
Global Configuration
Command Usage
Telnet is considered a virtual terminal connection and will be shown as
“Vty” in screen displays such as
show users . However, the serial
communication parameters (e.g., databits) do not affect Telnet
connections.
Example
To enter console line mode, enter the following command:
stopbits* Sets the number of the stop bits transmitted per
byte LC 4-24
disconnect Terminates a line connection PE 4-24
show line Displays a terminal line's parameters NE,
PE 4-25
Console(config)#line console
Console(config-line)#
Table 4-5. Line Command Syntax
Command Function Mode Page
* These commands only apply to the serial port.