SMC Networks 8606SX - annexe 1, Руководство по управлению

Страница: 30 / 152

U
SIN G T HE
S
YST EM
C
ONFIGURATION
P
ROGRAM
2-16
Configuring the Serial Port
You can access the on-board configuration program by attaching a
VT100 compatible device to the switch’s serial port. (For more
information on connecting to this port, see “Required
Connections” on page 1-2 .) The communication parameters for
this port can be accessed from the Seral Port Configuration screen
shown below and described in the following table.
Ti gerSw itch 1000 SMC860 8SX
Se rial Port Confi gurati on
M anage ment Mode : CONS OLE M ODE
B audra te : 1920 0
D atabi ts : 8
S topbi ts : 1
P arity : NONE
T ime-O ut (i n min utes) : 10
A uto R efres h (in seco nds) : 180
<AP PLY> < OK> <CA NCEL>
U se <TA B> or arro w key s to move. <Spac e> to scro ll op tions
Parameter Default Des cription
Management
Mode Console Mode Indicates that the co nsole port settings are
for direct console connection.
Baud Rate 19200 bps The rate at which data is sent between
devices.
Options : 2400, 4800, 9600, 19200, 38400,
57600, 115200 b ps, and auto detection.
Note that when auto detection is selected,
you need to first press the Enter key once to
set the data rate and initializ e th e
connection.
Databits 8 bits Sets the data bits of the RS-232 port.
Options : 7, 8