background image

 

 

Technical Information 

 

 

Type BT 02 

 
Page 1 
Testing standard: 

EN 1176-1:2008 / EN 15312:2007 

 
 
 
 

07.01.15 
 

 
 
General 

 
The described work is to be carried out by qualified specialists.

 

 
 
Dimensions

 

 

 

 

Width 

 

3,17 m 

Height 

 

2,08 m 

Depth 

 

0,80 m 

 

Age group 

No age restriction

 

 

 
Supplied Tools: 

1 socekt key-insertion 1/2" size 14 

 
Tools additionally required: 

1 ratch 1/2"

 

1 torx socket key T30 

 

*The mounting equipment is in a box, which is  
attached to a tube of the goal (lower left  
corner) 

 
 
 

Technical Details 

 
The smb citytor original II is made of screwable round tubes with a diameter of 82,5 x 3,2 mm for the frame 
tubes in the front and  60,3 x 2,9 mm for the frame tubes in  the  back. The net of the goal is made of black 
Herkules rope, 

 8 mm. The maximum mash size is 36 x 122 mm, so that EN 1176-1 is met for children from 

0 to 3 years. 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 

Figure 1            citytor II 

ATTENTION! 
 
Due to the technical characteristics of the goal, especially the mash size of 36 x 122 mm, it is not 
climbable.   
 
This goal meets the standards of DIN EN 1176-1:2008 as well as DIN EN 15312:2007. 

Содержание citytor Original11 BT 02

Страница 1: ...ached to a tube of the goal lower left corner Technical Details The smb citytor original II is made of screwable round tubes with a diameter of 82 5 x 3 2 mm for the frame tubes in the front and 60 3 x 2 9 mm for the frame tubes in the back The net of the goal is made of black Herkules rope 8 mm The maximum mash size is 36 x 122 mm so that EN 1176 1 is met for children from 0 to 3 years Figure 1 c...

Страница 2: ...e nets without having to remove or disassemble the entire goal Placing of the ground anchors into the concrete foundations The ground anchors are to be set into the concrete foundations on the same level as the play level Please make sure that the side with the movable slide block shows to the top figure 4 We have calculated a depth of 150 mm for the sub construction of the play level According to...

Страница 3: ...of the goal net are not fixed at this point Figure 4 Remove the safety covers of the ground anchors with a screwdriver Figure 3 The entire goal is to be adjusted via the ground anchors 1 We recommend the storage of the safety covers for a possible reuse later on Now the supplied screws M16x70 5 and lock washers 7 can be bolted with the help of the provided socket key insertion The flexibility of t...

Страница 4: ...pe coating is damaged and no wire is broken there is no urgent need for repair Please Note Frayed filament can be fused with a flame e g pocket lighter Operational inspection semi annual in addition to the visual routine inspection Check the ROWOCON connections for a firm fit o If a damage is discovered smb needs to be consulted The screwing of the goal frame needs to be checked missing safety cap...

Отзывы: