45
3-8 RS-485 (PTZ control)
If you mount the IP Camera Module with a pan-tilt camera cradles that
support pan-tilt control via RS-485 connection, you can use this function
to control pan-tilt camera cradle so you can control the orientation of IP
Camera Module from remote place.
Here are the descriptions of every setup item:
Item
Description
Enable RS-485
Check this box to enable RS-485 functionality.
Use Pelco-D
Address
Select this option and RS-485 interface will output
pan-tile control signal in Pelco-D format. This format
is widely accepted by most of pan-tilt camera
cradles.
You have also input pan-tilt camera cradle’s address
code in ‘Address’ field. This code must be identical to
pan-tilt camera cradle’s address code.
When the pan-tilt camera cradle does not support
Pelco-D protocol, you can define a protocol’s detail
by this function.
Use Custom
Protocol
Please refer to pan-tilt camera cradle’s user manual
to define the protocol.
-
Baud Rate: Select data baud rate of RS-485
