36
Shutter Time
This feature allows you to
adjust exposure time for
getting shorter time.
Slow Shutter
This feature allows you to
adjust exposure time for
getting longer exposure time.
Shutter T ime Slow Shutte r
Sensitivity up Here the ISO sensitivity only works for low lux
situation. The lower the number, the more
light required. It always is used in night mode
to increase sensitivity for getting the better
image quality.
AGC
Automatic gain control - the AGC detection
value is changing by objects.
IR-Cut
(Day/Night)
An IR-Cut filter is built in this IP Camera Module to
reduce the effect of IR lights (which will change the color
of image and makes it looks different than what you see
through your eye), and most of IR lights are coming from
sunlight.
You can select the behavior of IR-Cut filter:
-
Auto: IR filter will act automatically. If you don’t know
if you should use IR filter, select this option.
-
Always ON: IR filter is always on.
-
Always OFF: IR filter is always off.
-
Schedule: Set the day time then the camera will
switch the day/night mode following the setting.
WDR
Wide Dynamic Range:
The function is intended to provide clear images even
under back light circumstances where intensity of
illumination can vary excessively, namely when there are
both very bright and very dark areas simultaneously in
the field of view of the camera. WDR enables the capture
and display of both bright and dark areas in the same
frame, in a way that there are details in both areas, i.e.
bright areas are not saturated, and dark areas are not
too dark.
