Smawave Technology SGL4010 Скачать руководство пользователя страница 54

Страница: 54 / 54



Check that the power adapter is connected properly.



Check that the CPE is placed in an open area that is far away from obstructions, such as
concrete or wooden walls.



Check that the CPE is placed far away from household electrical appliances that generate
strong electromagnetic field, such as microwave ovens, refrigerators, and satellite dishes.

If the problem persists, contact authorized local service suppliers.

The power adapter of the CPE is overheated.

The CPE will be overheated after being used for a long time. Therefore, power off the CPE

when you are not using it.

Check that the CPE is properly ventilated and shielded from direct sunlight.

The parameters are restored to default values.

If the CPE powers off unexpectedly while being configured, the parameters may be restored

to the default settings.

After configuring the parameters, download the configuration file to quickly restore the CPE

to the desired settings.

Содержание SGL4010























































Результаты поиска

Содержание SGL4010

Отзывы:

Похожие инструкции для SGL4010

Бренды по названию

Популярные бренды

Smawave Technology SGL4010, Руководство пользователя

Результаты поиска

Содержание SGL4010

Отзывы:

Похожие инструкции для SGL4010

Бренды по названию

Популярные бренды