Smawave Technology SGL4010, Руководство пользователя

Страница: 31 / 54

Setting Allow access network outside the rules
To set allow access network, perform the following steps:
1. Choose
Firewall > IP Filtering .
2. Set Allow access network outside the rules.
3. Click Submit . As shown in Figure 5-40.
Figure 5- 40
Setting Deny access network outside the rules
To set allow access network, perform the following steps:
1. Choose
Firewall > IP Filtering .
2. Set Deny access network outside the rules.
3.
Click
Submit
. As shown in Figure 5-41.
Figure 5- 41
Adding IP Filtering rule
Add an IP address filtering rule, perform the following steps:
1. Choose
Firewall > IP Filtering .
2. Click Add list .
3. Set
Service
.
4. Set Protocol .
5. In the Source IP Address Range box, enter the source IP address or IP address segment to
be filtered.
6. In the Source port range box, enter the source port or port segment to be filtered.
7. In the
Destination IP Address Range
box, enter the destination IP address or IP address