49
Note:
Motion detection can generate an alarm based on any change of the environment
(including brightness, colour, etc.). It is not recommended to use this alarm function in
ordinary circumstances.
15.5 Linkage Settings
1. Select the output (output selectable output, output 1, output 2) in the corresponding
column; after selecting the output when an alarm is generated the corresponding alarm
output line will generate 12V high level to drive the work of other equipment.
2. It can also be chosen whether to record the Wlog, Wdata. On means recording, Off means
not recording.
15.6 Record settings
1. Record type: common record or record I frame
2. Record mode: boot record / alarm record / timer record
3. Packet time: 15/30/45/60 minutes, which stands for the time period in which the video
file will become a packaged file.
4.
Automatically overwritten can be selected to on / off, when on, the previous video files
will be automatically overwritten if the hard disk space is less than 2G as well as the
mirror video disk & SD card space is less than 300M.
