43
12 3G Settings
When the SVC420GPS-L/ SVC820GPS-L requires the use of a 3G network reporting platform,
it needs network-related settings inputted in this menu.
1. According to the communication configuration of the machine, insert the SIM card
supporting these: WCDMA (Unicom) and EVDO (Telecom) TD-SCDMA (Mobile).
The SIM card slot is on the front panel. Open the lock to open the protective cover; you will
see the SIM interface. Follow the instructions to insert the SIM card correctly.
2. Plug in the 3G antenna after inserting the SIM card, ensuring that the system is able to
receive good 3G signal.
3. Edit the following information under the 3G Settings menu interface:
A: Wireless set to open.
B: Select the type of communication, press "ENTER" button to select the corresponding
module (WCDMA / EVDO / TD-SCDMA is determined by the type of model, one model
only supports one mode.)
C: The access point and the centre number is generally default, which do not need
changing. User name and password for some providers are default. If it is a foreign 3G,
it would need the operators to provide access points and centre numbers. In some
places it is a must to enter username and password for a normal dial-up; when your host
can not be reported. Please make sure your 3G settings are correct
D: Save it after completing all the settings.
4. After exiting all menus press the INFO button on the remote control, you will be able to
see 3G communications. If the signal is good it will show that the dial-up is successful, the
device can then be reported to SVC420/820GPS-L platform with three points of the server IP
address settings, port settings and device number settings.
