SmartWitness SVC400GPS-L, Руководство пользователя

Страница: 33 / 90

33
3-2-2. Record Settings / Channel Set Up
Ø
Set recording mode, frame rate, and audio per each channel
Ø
CHANNEL
- First, select the channel you wish to configure using [<] and [>] keys.
- Second, use the [
∨
] and [
∧
] keys to move between “RECORD, FPS,
AUDIO”, the specific settings will only apply to the selected channel.
- Configure all cameras (channels) that are connected to the main unit.
Ø
RECORD
- Choose between “OFF/Normal/Event / Event”
- If set to “OFF”, the channel will not be recorded.
- If set to “Normal”, the channel will be recorded continuously as long as
there is power to the unit.
- If set to “Event”, the channel will only be recorded if there is an event.
* If the times for PRE REC TIME and POST REC TIME are set, the recording
will include these periods.
* Event setting can only be done through the PC Viewer. Please refer to
section 10-2-3.
- If set to “ Event”, in normal conditions, recording will be at 1 (ONE)
frame per second (FPS) but in an event, it will record at the set frames per
second.
Ø
FPS (Frames per Second)
- Possible FPS will differ based on the resolution and Video standard (PAL or
NTSC).
- The maximum frames per resolutions are, at D1
：
60 frames, HD1
：
120
frames, and CIF
：
240 frames. The total frames need to be considered when
setting the FPS as the total number of frames per resolution cannot be
exceeded. The total frames divided by the number of cameras used is the
maximum number of possible FPS for each channel, e.g. if using eight
cameras at CIF resolution, the maximum number of frames for each camera
will be 30.
- FPS can be set from 1 to 30 frames.