SmartWitness SVC400GPS-L, Руководство пользователя

Страница: 19 / 90

19
iv. Reverse gear: Reverse
v. Emergency: Left & Right
* Multiple signal display is possible
⑨
G-Sensor
* When installing your device, configuring your G-sensor is essential. Refer
to Appendix B for the configuration values and select the correct angle setup
for each axis.
⑩
RPM: Displays engine RPM measured by RPM pulse.
* If the RPM indicated here varies with the RPM gauge, please re-configure
the RPM pulse type by going to [Menu -> Device -> Signal -> RPM Pulse
Type] and selecting the correct type.
3. MAIN MENU
1) To access Menu, press [MENU] and the default password: [>][<][
∨
][
∧
].
The password can be changed, refer to the below Notice box.
2) After typing the password, press [MENU] again and the below screen will
show.
3) Within Menu, there are three directories: Device, Record, and System.
4) Use [>] and [<] to change directories.
5) Within each directory, there are sub-directories that can be accessed by
pressing [
∨
][
∧
] and then [MENU]
6) Press [ESC] to return to previous stage.
Note
The values on the Information Screen refreshes every second, please give ample time
for the device to display before changing the values or settings.
Note
The password can be changed by going to [MENU -> SYSTEM -> USER MANAGEMENT ->