Smartwatch H20HVR16A16I, Руководство по эксплуатации, Страница: 129 / 186

User Manual of Digital Video Recorder
128
9.2.12 Configuring Email Settings
Purpose:
The system can be configured to send an Email notification to all designated users if an alarm event is detected,
a motion detection event is detected, etc.
Before you start:
The device must be connected to a local area network (LAN) that maintains an SMTP mail server. The network
must also be connected to either an intranet or the Internet depending on the location of the email accounts to
which you want to send notification.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS Server on the Network
Settings interface.
Figure 9. 28 Network Settings Interface
3. Click Apply to save the settings.
4. Click the Email tab to enter the Email Settings interface.
Figure 9. 29 Email Settings Interface
5. Configure the following Email settings:
Enable Server Authentication (optional): If your mail server requires authentication, check this
checkbox to use authentication to log in to this server and enter the login User Name and Password.