SMARTSCAN 053B101 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 49

SMARTSCAN 053B101 Скачать руководство пользователя страница 42

T4 (053B) Series

Installation Guide

CD354/220116

Smartscan Ltd

38

Appendix 1

–

Important Safety Information



Ensure that the Smartscan safety light curtain is installed by a competent
person using the installation information provided.



Smartscan safety light curtains are supplied as matching serial number pairs
and must be used as matching serial number pairs.



It is the responsibility of the employer that the safety light curtain is properly
installed, operated and maintained as well as the suitable machinery on which
the safety product is installed. All the applicable national and international
legislation and technical standards for the corresponding machine application
must be complied with.



The safety light curtain is only one element in the overall machine safety
circuit, the whole machine safety control circuit must be a fail-safe design.



The stopping elements of the machine should be regularly checked to make
sure the machine stop time performance is reliable and within the specified
parameters.



Do not repair or modify the Smartscan safety light curtain. Smartscan products
can only be repaired by the manufacturer. Any work carried out on the product
that is not done by the manufacturer will invalidate the warranty terms. All
products being returned for repair must be matching serial number pairs.



The Smartscan Product installation sheet and installation guide do not provide
instruction or operation information for the machine that it is integrated to.



The Smartscan Product Installation instructions should be kept with the safety
light curtain during its entire working life.

«
...
40
41
42
43
44
...
»

Содержание 053B101


















































Отзывы:

Нет отзывов