SMARTSCAN 053B101 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 49

SMARTSCAN 053B101 Скачать руководство пользователя страница 2

Smartscan Ltd
Pywell Road
Willowbrook Industrial Estate
Corby
Northamptonshire
NN17 5XJ - England

Tel. +44 (0)1536

– 401 313

[email protected]
www.smartscan.co.uk

Important!

Failure to read and follow the instructions provided on the Installation Sheet
and Installation Guide can lead to the incorrect application or use of the T4
(053B) series safety light curtain.  This could lead to personal injury and
damage to equipment.  All applicable machine safety standards and
regulations should be taken into account when installing the T4 (053B) series
safety light curtain or any machine safety product.

The Installation Sheet and Installation Guide can be downloaded from our web
site at www.smartscan.co.uk

The T4 (053B) series Safety Light Curtain Installation Guide (CD354/220116)
is subject to change without notice.  Smartscan Ltd shall not be held
responsible for technical errors, editorial errors or omissions contained herein,
nor for incidental or consequential damages resulting from the use of this
material.

© 2016 Smartscan Ltd.  All Rights Reserved.  Unless explicitly stated
otherwise, all rights including those in copyright in the content of this document
are owned by or controlled for these purposes by Smartscan Ltd.

Except as otherwise expressly permitted under copyright law or Smartscan
Ltd, reproduction of the document or alteration of this document may not be
carried out in any way without first obtaining Smartscan Ltd

.’s written

permission.

«
1
2
3
4
...
»

Содержание 053B101


















































Отзывы:

Нет отзывов