SmartSafe iSmartINC 605, Инструкция по эксплуатации

Страница: 2 / 16

ii
General Notice
Other product names used herein are for identification purposes only and may be trademarks of their
respective owners. We disclaims any and all rights in those marks.
Disclaimer
To take full advantage of the unit, you should be familiar with the engine.
All information, illustrations, and specifications contained in this manual are based on the latest information
available at the time of publication. The manufacturer resume the right of modify this manual and the machine
itself with no prior notice.
This unit is made for the purpose of persons who have special techniques and certifications.
Safety Precautions
Read all service procedures and precautions, installation instructions and equipment operating manuals
thoroughly. Failure to observe these precautions, or the improper use of equipment, could result in property
damage, serious injury or death. Never allow improperly trained personnel to perform these procedures or
operate the equipment.
a) Read the operating instructions before attempting to operate the unit. Keep this manual with the unit at all
times.
b) Do not operate equipment with a damaged cord or if the equipment has been dropped or damaged until it
has been examined by qualified service personnel.
c) Do not hang cords over the edge of the table, bench or counter, or come in contact with hot manifolds or
moving fan blades.
d) If an extension cord is needed, a cord with a rated current equal to or greater than that of the equipment
should be used. Cords rated for lower current than that of the equipment may overheat.
e) Always unplug equipment from electrical outlet when the machine is not in use. Never pull the cord when
unplugging from the outlet.
f) To protect against risk of fire, do not operate the equipment in the vicinity of open container containing
flammable liquid (gasoline).
g) Make sure that the unit is in the well-ventilation area when operating the fuel engine.
h) Keep lighted cigarettes, sparks, flames or other ignition sources away from fuel systems at all times.
i) In order to avoid electric shock, keep away from the damp part of a working unit and avoid exposing it to
the rain.
j) Please operate the unit according to the operation procedures in the manual. Only use the accessories
recommended by the manufacturer.
k) Do not switch on the ultrasonic system when there is no ultrasonic detergent in the ultrasonic cleaning
chamber. Otherwise, damage to the ultrasonic cleaner can be resulted.
l) Keep the unit well grounded.
m) ALWAYS WEAR SAFETY GOGGLES. Common used glasses are NOT safety glasses.
n) When disconnecting any connector of the pressurized fuel hose, wrap the connector with towel to prevent
the fuel from spurting out. Spurted fuel may cause personal injury or fire.
o) Test liquid is used by the main unit. Detergent is used for on-vehicle cleaning. The ultrasonic cleaning
uses specified ultrasonic detergent (It can be replaced by detergent provided together with the unit).
Note: Specifying operations that require attention when operating the equipment.
Warning: Specifying a possible hazard that could result in damage to the machine or personal injury.
PLEASE SAVE THESE INSTRUCTION.
iSmartINC 605 Injector Cleaner & Tester