iSmartINC 402 Injector Cleaner & Tester User’s Manual
ii
containing flammable liquid (gasoline).
Make sure that the unit is in the well-ventilation area
when operating the fuel engine.
Keep lighted cigarettes, sparks, flames or other
ignition sources away from fuel systems at all times.
Keep hair, clothes, fingers or the other body parts
away from the running parts of the unit.
In order to avoid electric shock, keep away from the
damp part of a working unit and avoid exposing it to
the rain.
Please operate the unit according to the operation
procedures in the manual. Only use the accessories
recommended by the manufacturer.
Do not switch on the ultrasonic system when there
is no ultrasonic cleanser in the ultrasonic cleaning
chamber. Otherwise, damage to the ultrasonic
cleaner can be resulted.
Keep the unit well grounded.
Provide ventilation through an exhaust gas removal
system, ventilation fans or large doors. Carbon
monoxide gas, which is odorless and colorless, can
cause serious illness, injury or death.
Avoid contacting hot surfaces such as exhaust
pipes, radiator, etc.
Before testing vehicles, put the transmission lever in
NEUTRAL position, apply the parking brake, and
block the front wheels.
ALWAYS WEAR SAFETY GOGGLES. Common
used glasses are NOT safety glasses.
When disconnecting any connector of the
pressurized fuel pipe, wrap the connector with towel
to prevent the fuel from spurting out. Spurted fuel
may cause personal injury or fire.
Test liquid is used by the main unit. Cleanser is
used for on-vehicle cleaning. The ultrasonic
cleaning uses specified ultrasonic cleanser (It can
be replaced by cleanser provided together with the
unit).
NOTE: SPECIFYING OPERATIONS THAT
REQUIRE ATTENTION WHEN OPERATING THE
EQUIPMENT.
WARNING: SPECIFYING A POSSIBLE
HAZARD THAT COULD RESULT IN DAMAGE
TO THE MACHINE OR PERSONAL INJURY.
PLEASE SAVE THESE
INSTRUCTIONS
