Smart Power Systems Network Power Management System
5
Step 2. Configure the IP address for the Smart Power Systems Network Power Management
Card
Method 1: Using the Power Device Network Utility
1. Install the Power Device Network Utility available for download at:
https://www.smartpowersystems.com/downloads/Power-Device-Network-Utility/universal-pdnu151-setup.exe
2. After installation completes, run the
“Power Device Network Utility”.
3. The main window of the Power Device Network Utility program is shown in Figure 1. The
configuration tool will display all Smart Power Systems Network Power Management Card
devices present on the local network subnet. The "Refresh" button is used to search the local
network subnet again.
Figure 1. The main window of the “Power Device Network Utility” program.
4. Select the Network Power Management Card you are setting up. Click on the Tools menu and
select “Device Setup” or double click the device you want to configure.
5. You can modify the IP Address, Subnet Mask, and Gateway address for the Device MAC Address
listed in the Device Network Settings window, as shown in Figure 2. The factory default IP
Address is 192.168.20.177 and the default Subnet Mask is 255.255.255.0.
Figure 2. The Device Network setting window.
