Smart Power Systems Network Power Management System
22
[System->Network Service->TCP/IPv6]
Display and configure the current IPv6 settings.
Item
Definition
IPv6 Interface
Displays the current IPv6 address.
IPv6 Gateway
Displays the current IPv6 gateway.
IPv6 Configuration
Access
Set the IPv6 service to either Enable or Disable.
Address Mode
Router Control
The IPv6 address is assigned through one of the following methods as
configured in the router settings: Stateless Address Auto-configuration,
Stateless DHCPv6 or Stateful DHCPv6.
Manual
The IPv6 address is assigned manually.
Manual IPv6 Address
Enter the IPv6 address directly when the Manual setting is selected.
[System->Network Service->SNMPv1 Service]
Allow users to use a NMS and configure the
appropriate SNMPv1 settings.
Item
Definition
SNMPv1 Service
Allow Access
Set the SNMPv1 service to either Enable or Disable.
SNMPv1 Access Control
Community
The name used to access this community from a Network Management
System (NMS). The field must be 1 to 15 characters in length.
IP Address
NMS access can be restricted by entering a specific IP address or an IP
network subnet mask. The following subnet mask rules apply:
•
192.168.20.255: Access only by an NMS on the 192.168.20 segment.
•
192.255.255.255: Access only by an NMS on the 192 segment.
•
0.0.0.0 (the default setting) or 255.255.255.255: Access by any NMS
on any segment.
Access Type
The allowable action for the NMS through the community and IP address.
•
Read Only: GET command allowed any time; SET command
restricted.
•
Write/Read: GET command allowed any time; SET command
allowed anytime unless a user session is active.
•
Forbidden: GET and SET commands are restricted.
