Smart Power Systems Network Power Management System
20
[System->Security->Local Account]
This page is used to configure the login account.
Information
Description
Administrator
Administrator has full access to read/write configuration settings.
Note:
The maximum length of both User Name and Password of
Administrator is 15 characters.
Viewer
Viewer has restricted access to read only.
Note:
The maximum length of both User Name and Password of
Viewer is 15 characters.
Admin/Viewer Manager IP
This setting determines what IP address is allowed to access the
device using either Admin or Viewer accounts. If you want to access
PMCARD from any IP address, you can set one of them as 0.0.0.0
or 255.255.255.255.
Note: A range of IP addresses can be allowed by entering the subnet
mask. For example 192.168.20.0/16 means the IP which has subnet
of 192.168.0.0 can be allowed to access.
Change Administrator account:
1. Enter User Name
2. Enter Current Password
3. Set the Manager IP
(optional)
4. Enter New Password
5. Enter Confirm Password
6. Click “Apply”
Note:
The maximum length of both User Name and Password is 15 characters.
Change Viewer account:
1. Select “Allow Access” to enable the Viewer account
2. Enter the User Name
3. Set the Manager IP
(optional)
4. Enter New Password
5. Enter Confirm Password
6. Click “Apply”
Note:
The maximum length of both User Name and Password is 15 characters.
