Back up power
The receiver unit is designed to use
a regular alkaline 9V battery as
back up power source. To install this
back up batter y, remove the 4
screws and open the battery door.
9V alkaline battery
Back up power
How to connect to your home security system
The remote receiver has a three junction terminal block, so that you
can connect it to your home security system or other third party
safety device. When the receiver receives a RF (radio frequency)
alarm signal, it will activate the terminal block in 3 seconds. Resetting
the receiver within 3 seconds ensures that you will not activate your
home security system.
Loosen the screw at the top
and remove the blue cap.
Remove the battery door
and loosen the two
screws. Open up the box
and you can find a 3
junctions terminal block
near the A/C adapter
power jack.
14
