Turn the unit ON
Press the green ON button and the unit will sound one short beep to
indicate it is on. The alarm siren will sound when the sensor picks up
any water wave motion. Therefore you should wait a few minutes for
the water wave to settle down before turning on the unit.
If the alarm goes off immediately after you
hit this green ON button, recheck the
mounting of the alarm unit. If the unit is
not securely mounted, pushing the
control head will cause the alarm to
sound off. If the alarm continues to sound
off whenever it is turned on, please read
the Sensitivity Adjust section.
Turn the unit OFF
Press and hold both the green ON and
the yellow RESET button
simultaneously for 3 seconds, until
you hear 5 consecutive beeps. The unit
is now turned OFF.
3 seconds
Reset the unit
Press the yellow RESET button to turn OFF the
siren. This will reset the unit to the ON state
automatically.
7