Smartgen HGM8110DC, Руководство пользователя

Страница: 14 / 60

HGM8110DC GENSET CONTROLLER USER MANUAL
HGM8110DC Genset Controller 2018-12-27 Version 1.1 Page 14 of 60
5.3.2. PARARMETERS SETTING MANUAL
Press and hold for more than 3 seconds to enter user menu;
Parameter
：
After entering the correct password (factory default password is 00318) you can enter
parameter settings screen.
Language
：
Selectable Chinese, English and others (default: Espanol)
Commissioning
：
On load, off load and custom commissioning are optional. Custom commissioning
can configure on load or not during commissioning, when to commissioning and select the mode after
commissioning (manual mode, auto mode and stop mode).
Clear users’ accumulation ：
Can clear total run time A and B, total electric energy A and B.
5.3.3.
PARAMETER SETTINGS

DC generator settings

Timers settings

Engine settings

AC Generator settings

AC Load settings

Breaker settings

Temperature sensor settings

Oil pressure sensor settings

Level sensor settings

Flexible sensor 1 settings

Flexible sensor 2 settings

Digital inputs settings

Relay Outputs settings

Module settings

Scheduling and maintenance settings

Expansion module settings
NOTE: Pressing can exit setting directly during setting.