HGM6510 GENSET PARALLEL UNIT
HGM6510 Genset Parallel Unit
ISSUE 2013-07-15
Version 1.7
Page 6 of 52
1 OVERVIEW
HGM6510
controller is designed for manual/auto parallel systems of up to 20 generators
with similar or different capacity. Additionally, it is suitable for single unit constant power
output and mains paralleling. It allows automatic start/stop, data measurement, alarm
protection as well as remote control, remote measurement and remote communication
function. It fit with LCD display, optional languages interface, and it is reliable and easy to
use.
Utilizing the GOV (Engine Speed Governor) and AVR (Automatic Voltage Regulator)
control function, the controller is able to synchronize and share load automatically; it can
be used to parallel with other HGM6510 controller.
HGM6510
controller also monitors the engine, indicating the operational status and fault
conditions accurately. When abnormal condition occurs, it splits bus and shuts down the
genset, simultaneously the exact failure mode information is indicated by the LCD display
on the front panel.
The powerful 32-bit Microprocessor contained within the module allows for many features
to be incorporated as standard. SAE J1939 interface enables the controller to
communicate with various ECU (ENGINE CONTROL UNIT) which fitted with J1939
interface. Multiple parameters such as engine speed, water temperature, oil temperature,
and oil pressure can be transmitted via J1939 interface and displayed on LCD, so there is
no need to install additional sensors and complicated wiring is avoided while electric
parameters accuracy is ensured.
