Smartgen HGM4100LT, Руководство пользователя

Страница: 43 / 48

HGM4100LT GENSET CONTROLLER USER MANUAL
HGM4100LT Genset Controller 2019-01-28 Version1.0 Page 43 of 48
Table 24 Engine OEM Connector
Terminals of controller engine OEM connector Remark
Programmable output1 45
Start relay output - Connected to starter coil directly;
Programmable output 2 16&41 Set it as idling speed control, normal close
output; making 16 connected to 41 during
high-speed running via external expansion
relay;
Programmable output 3 19&41 Set it as pulse speed raise control, normal
open output; making 19 connected with 41
for 0.1s during high-speed warming via
external expansion relay;
CAN_SCR - CAN communication shielding line;
CAN(H) 1
Using impedance 120Ω connecting line;
CAN(L) 21
Using impedance 120Ω connecting line;
Engine type: Common J1939.
13.8 DETROIT DIESEL DDEC III / IV
Table 25 Engine CAN Connector
Terminals of controller CAN port of engine Remark
Programmable output1
Expand 30A relay;
supplying battery
voltage for ECU;
Set configurable
output 1 as “Fuel Relay
Output”;
Start relay output - Connected to starter coil directly;
CAN_SCR - CAN communication shielding line;
CAN(H) CAN(H)
Using impedance 120Ω connecting line;
CAN(L) CAN(L)
Using impedance 120Ω connecting line;
Engine type: Common J1939.
13.9 DEUTZ EMR2
Table 26 F Connector
Terminals of controller F connector Remark
Programmable output1
Expand 30A relay,
providing battery voltage
for terminal 14; Fuse is
16A;
Set configurable
output 1 as “Fuel Relay
Output”;
Start relay output - Connected to starter coil directly;
- 1 Connected to battery negative pole;
CAN_SCR -
CAN communication shielding line;
CAN(H) 12
Using impedance 120Ω connecting line;
CAN(L) 13
Using im
pedance 120Ω connecting line;
Engine type: Volvo EDC4.