Smartgen HGM4100LT, Руководство пользователя

Страница: 42 / 48

HGM4100LT GENSET CONTROLLER USER MANUAL
HGM4100LT Genset Controller 2019-01-28 Version1.0 Page 42 of 48
13.5 CUMMINS GCS-MODBUS
It is suitable for GCS engine control module. Read engine information by using RS485-MODBUS.
Engine types are QSX15, QST30, QSK23 / 45/60/78 and so on.
Table 21 D-SUB Connector 06
Terminals of controller D-SUB connector 06 Remark
Programmable output1 5&8
Set configurable output 1 as “Fuel Relay
Output”.; Outside expand relay; when fuel
outputs, make port 06 and 08 of the
connector 06 be connected;
Start relay output - Connected to starter coil directly;
Table 22 D-SUB Connector 06
Terminals of controller D-SUB connector 06 Remark
RS485 GND 20
CAN communication shielding line
(connected to ECU terminal only);
RS485+ 21
Using impedance 120Ω connecting line;
RS485- 18
Using impedance 120Ω connecting line;
Engine type: Cummins QSK-MODBUS, Cummins QST-MODBUS, Cummins QSX-MODBUS.
13.6 CUMMINS QSM11
Table 23 Engine OEM Connector
Terminals of controller engine OEM connector Remark
Programmable output1 38
Set configurable
output 1 as “Fuel Relay
Output”;
Start relay output - Connected with starter coil directly;
CAN_SCR - CAN communication shielding line
(connected
with controller’s this terminal
only);
CAN(H) 46 Using
impedance 120Ω connecting line;
CAN(L) 37
Using impedance 120Ω connecting line;
Engine type: common J1939.
13.7 CUMMINS QSZ13