Smartgen HEM4300, Руководство пользователя

Страница: 42 / 55

HEM4300 Engine Controller User Manual Page 42 of 55
No. Type Description
command to ECU.
18 DPF Regeneration Test Mode It simulates DPF regeneration request when input is active.
19 Reserved
20 Reserved
21 Alarm Stop Inhibit
All shutdown alarms are inhibited except emergency stop and
over speed shutdown. (i.e. battle mode or override mode)
22 Reserved
23 Reserved
24 Remote Control Mode
Controller will not start and remote start/stop can be realized
via “Remote Start/Stop Input” or RS485 communication when
input is active.
25 External Charging Failure When input is active, failed to charge warning alarm occurs.
26 High Temp Shutdown Connects to sensor digital input.
27 Low OP Shutdown Connects to sensor digital input.
28 Remote Start/Stop
In remote control mode, when input is active, engine can start.
When input is inactive, engine will stop.
29 Raise Speed A button can be connected externally (not self-lock), manually
control speed.
30 Drop Speed
31 Reserved
32 Simulate Stop Key
An external button (unlatched) can be connected and pressed
as simulate panel key.
33 Simulate Start Key
34 Simulate Load Key
35 Simulate Reset Key
36 Simulate F1 Key
37 Simulate F2 key
38 Simulate F3 key
39 Simulate F4 key
40 Simulate F5 key
41 Simulate F6 key
42 Alt Config. 1 Active
When input port is active, configuration is active; Different
parameters can be set for it, making convenience for users to
choose current configuration by input port.
43 Alt Config. 2 Active
44 Alt Config. 3 Active
45 Reserved
46 Reserved
47 Load Input
Act between start idle and stop idle; When input is active, load
control outputs; When it is inactive, load control stops
outputting.
48 Reserved
49 Air Filter Block Air filter alarm occurs when input is active.
50 Forward Rotation Forward rotation outputs when input is active.
51 Backward Rotation Backward rotation outputs when input is active.
52 Light Clamp Light clamp outputs when input is active.
53 Forward Rotation Limit Forward rotation stops output when limit is active.
54 Backward Rotation Limit Backward rotation stops output when limit is active.