SMARTEYE Multi-netx, Руководство пользователя

Страница: 9 / 76

SMARTEYE
Netx Ethernet IP Control Unit User Manual Page 3
Filename: netx IP Platform User Manual R0 .doc
…
In Control
A
M
4.1 Power/Wiring for Power over Ethernet 802.3af (48v) – S-netx and T-netx only.
The S-netx and T-netx both offer an optional power input module, which meets the 48VDC
Ethernet 802.3af specification. With this option, these units may be powered via an 802.3af
compliant power source through the Ethernet communication cable. This provides power for
both the CPU circuit card and the reader(s) connected to the unit. An RJ45 connector is
provided on the S-netx and T-netx for delivering both power and data. See the appendix for
detailed drawings.
4.2 Power/Wiring for T-netx Model SP4051/04-IP
The T-netx SP4051/04-IP unit is designed to be powered from 110 to 240 VAC 50-60 Hz. This
unit includes an AC circuit breaker and internal 24VDC power supply. See the appendix for
detailed drawings.
4.3 Power/Wiring for Multi-netx Model SP4061/04-IP and SP4062/02-IP
The Multi-netx SP4061/04-IP and SP4062/02-IP are designed to be powered from 110 to 240
VAC 50-60 Hz. These units include an AC circuit breaker and internal 24VDC power supply.
See the appendix for detailed drawings.
5.0 Communication Line Wiring
All Smarteye Ethernet IP network products have two communication ports: the Ethernet control
port, and the auxiliary port. The S-netx is supplied with an RJ45 connector on the inside of the
box and a single-hole Ethernet cable grommet on the outside of the box. The T-netx and Multi-
netx have an RJ45 connector on the outside of the unit. The RJ45 connector provides
communication for all products and optional power connections for the S-netx and T-netx.
Diagrams of the Ethernet connection can be found in the appendix.
The auxiliary port connection is a 9-pin DB connector on all Netx products. The auxiliary port is
factory configured for RS232 communications (57600 baud, 8 data bits, parity none, 1 stop bit,
flow control none).
Belden 8723 or equivalent (2 shielded pairs, 22 gauge) is recommended for RS232 connections.
A detailed wiring drawing can be found in the appendix.
Note : The serial control port in not supported on the Ethernet IP network products models. It is
only supported on the Standard network products models.