SMARTEYE Multi-netx, Руководство пользователя, Страница: 27 / 76

SMARTEYE
Netx Ethernet IP Control Unit User Manual Page 21
Filename: netx IP Platform User Manual R0 .doc
…
In Control
A
M
8.1.4 Manual Assignment of IP address using a Web Browser
A list of available static IP addresses will need to be acquired from the network administrator
(one per Smarteye Netx Control Unit). Once these are obtained, the control unit’s IP addresses
can be assigned using a standard web-browser.
The Smarteye Netx Control Unit is shipped with an IP address of 192.168.22.243. This address
can be used to make a direct connection from a PC to the control unit using a crossover cable or
a standard cable with a hub.
The computers network properties must be altered to match the control unit’s default IP address.
The PC’s network card would need to be given a static IP of say 192.168.22.242 for example in
order to communicate with the control unit. An example of how to do this on a PC running
windows 2000 as the operation system is shown below.
Begin by right clicking on the “Start” button in the
lower left hand corner and selecting “Settings”. Then
click on “Network and Dial-up Connections”
(Figure 1).
This will bring up the “Network and Dial-up
Connections” window as shown in figure 2. Double
click on the active LAN connection.
This will then display the LAN status window as
shown in figure 3.
Figure 1