Smarter tools ARC-100S, Руководство по эксплуатации

Страница: 35 / 56

3-2
• In areas, not subjected to abnormal vibration or shock.
•
In areas, not exposed to direct sunlight or rain.
•
Place at a distance of 12” – 18” (300 - 460mm) or more from walls or similar
that could restrict natural air flow for cooling
3.2 Environment
These units are designed for use in environments with increased hazard of
electric shock. Examples of environments with increased hazards are:
A. In locations in which freedom of movement is restricted, so that the operator is
forced to perform the work in a cramped (kneeling, sitting or lying) position
with physical contact with conductive parts.
B. In locations which are fully or partially limited by conductive elements, and in
which there is a high risk of unavoidable or accidental contact by the operator.
C. In wet or damp hot locations where humidity or perspiration considerably
reduces the skin resistance of the human body and the insulation properties of
accessories.
Environments with increased hazard of electric shock do not include places
where electrically conductive parts in the near vicinity of the operator, which can
cause increased hazard, have been insulated.
3.3 Electrical Input Power
The W100S/ST is a three-wire grounded device (hot-neutral-ground) rated for
125 V maximum.
THE W100S/ST SHOULD BE OPERATED FROM A SINGLE-
PHASE 50/60Hz, AC POWER SUPPLY. THE INPUT
VOLTAGE SHOULD MATCH THE ELECTRICAL INPUT
VOLTAGES SHOWN ON THE INPUT DATA LABEL ON THE
UNIT NAMEPLATE. SEE SECTION 2.1 FOR EXAMPLE
DO NOT ATTEMPT TO CUT OFF THE GROUND PIN TO FIT
IT TO A 1–15R OUTLET OR EXTENSION CORD. BY DOING
SO, THE LIVE/NEUTRAL POLARITY IS LOST AND WILL
INCREASE THE RISK OF SHOCK.