Smarter tools ARC-100S, Руководство по эксплуатации

Страница: 10 / 56

1-7
•
Turn face away from valve outlet when opening cylinder valve.
•
Keep protective cap in place over valve except when cylinder is in use or
connected for use.
•
Read and follow instructions on compressed gas cylinders, associated
equipment, and CGA publication P-1 listed in Safety Standards.
1.3 Additional Symbols for Installation, Operation, and
Maintenance
FIRE OR EXPLOSION hazard.
•
Do not install or place unit on, over, or near combustible
surfaces.
•
Do not install unit near flammables.
•
Do not overload building wiring – be sure power supply system
is properly sized, rated, and protected to handle this unit.
FALLING UNIT can cause injury.
•
Use lifting eye to lift unit only, NOT running gear, gas cylinders,
or any other accessories.
•
Use equipment of adequate capacity to lift and support unit.
•
If using lift forks to move unit, be sure forks are long enough to
extend beyond opposite side of unit.
OVERUSE can cause OVERHEATING
•
Allow cooling period; follow rated duty cycle.
•
Reduce current or duty cycle before starting to weld again.
•
Do not block or filter airflow to unit.
STATIC (ESD) can damage PC boards.
•
Put on grounded wrist strap BEFORE handling boards or parts.
•
Use proper static-proof bags and boxes to store, move, or ship
PC boards.