Smarter tools ARC-100S Скачать руководство пользователя страница 11

Страница: 11 / 56

1-8

MOVING PARTS can cause injury.

•

Keep away from moving parts.

•

Keep away from pinch points such as drive rolls.

WELDING WIRE can cause injury.

•

Do not press gun trigger until instructed to do so.

•

Do not point gun toward any part of the body, other people, or

any metal when threading welding wire.

MOVING PARTS can cause injury.

•

Keep away from moving parts such as fans.

•

Keep all doors, panels, covers, and guards closed and

securely in place.

H.F. RADIATION can cause interference.

•

High-frequency (H.F.) can interfere with radio navigation,

safety services, computers, and communications equipment.

•

Have only qualified persons familiar with electronic equipment

perform this installation.

•

The user is responsible for having a qualified electrician

promptly correct any interference problem resulting from the
installation.

•

If notified by the FCC about interference, stop using the equipment at once.

•

Have the installation regularly checked and maintained.

•

Keep high-frequency source doors and panels tightly shut, keep spark gaps
at correct setting, and use grounding and shielding to minimize the
possibility of interference.

Содержание ARC-100S

























































Результаты поиска

Содержание ARC-100S

Отзывы:

Похожие инструкции для ARC-100S

Бренды по названию

Популярные бренды

Smarter tools ARC-100S, Руководство по эксплуатации

Результаты поиска

Содержание ARC-100S

Отзывы:

Похожие инструкции для ARC-100S

Бренды по названию

Популярные бренды