7
2. Hardware istallation
2.2.2 Using DC power
1. Insert one end of the supplied RJ-45 cable to the SAG-1010 Ethernet port.
2. Insert the other end of the RJ-45 cable to a network hub, switch, router, or wall patch Ethernet
port.
3. Connect the power adapter plug to the SAG-1010 Power socket.
4. Connect the SAG-1010 power adapter to a wall socket.
5. Connect the network hub, switch, or router power adapter plug to the Power socket of the device.
6. Connect the network hub, switch, or router power adapter to a wall socket.
2.2.3 Using USB bus power
Replace the AC-DC power cable with a USB power cable and insert into an available USB port
on any device (computer, notebook, network hub, switch, or router) and turn ON that device.
Wall socket
Network Device
AC-DC power cable
Network Device
with USB
USB power cable
