2
1. Product Introduction
1.3.1. Top View
LEDs
The SAG-1010 comes with three LED indicators
(Ethernet, Wireless, and Power).
Air vents.
These vents provide ventilation to the device.
1.3.2. Bottom View
Mounting hook
Use the mounting hook to install the device on
concrete or wooden surfaces using a roundhead screw.
1.3.3. Rear View
Ethernet port
This port connects the supplied RJ-45 plug and cable.
Power socket
This socket connects the power adapter plug.
Reset button
Press this button for more than five seconds to load the
default values. In Ethernet adapter mode, press this
button for less than five seconds to connect to the first
saved wireless connection in the profile table.
1.4. LED indicators
The SAG-1010 comes with a Ethernet, Wireless, and Power LED indicators. Refer to the table
below for LED indications.
LED
Status
Indication
Ethernet
On
Off
The device is connected to an Ethernet network.
The device is off or not connected to an Ethernet network.
Wireless
Off
Blinking
The device is not associated with an AP or other wireless device.
The device is transmitting or receiving data.
Power
On
Off
The device is on and ready.
The device is off or performing boot sequence.
Ethernet
DC IN socket
Reset button
Status Indicators
Mounting hole
