SMART SE240, Инструкция по установке и эксплуатации

Страница: 40 / 100

34 Configuring the SMART Hub SE240
1. Press Menu .
The Welcome Center appears.
2. Press Settings .
The Settings dialog box appears.
3. If a password is required to change the configuration settings, type the password in the box at
the bottom of the menu, and then press
OK .
NOTE: For information on the configuration settings password, see page 20.
4. Press Network and Conference .
5. Press Conferencing .
6. Select the Enable conferences with Bridgit software check box to use Bridgit conferencing
software.
To configure Bridgit conferencing software
IMPORTANT To use the Bridgit conferencing software features in the SMART Hub SE240, you
must do one of the following:
• Purchase and install Bridgit server software.
• Purchase a subscription for the Bridgit conferencing service.
• Install a trial version of Bridgit software for 30 days, and then purchase the
server software or service from SMART Technologies .
• Be invited to a conference by a person or organization with Bridgit software.
For more information on these options, see the Bridgit page of the SMART support
site .