SMART Adio 340, Руководство по установке

Страница: 11 / 28

7 | 1012080 Rev A1
C H A P T E R 2
Installing your SMART Audio system
Installing ceiling speakers
For each of the four speakers, use the ceiling speaker cut-out template to cut a hole in a
ceiling tile, and then assemble the ceiling tile bridge, secure the speaker to the ceiling tile and
replace the tile.
WARNING
Take appropriate safety precautions when working at ceiling height, and use a sturdy
ladder to reduce the risk of personal injury.
To cut a hole in a ceiling tile for the ceiling speaker
1. For each ceiling tile you removed while installing
speaker wires, place the ceiling speaker cut-out
template in the middle of the tile, and then trace
the outline with a pencil.
2. Cut out the traced circle with a drywall saw.
To assemble the ceiling tile bridge
Insert the tile bridge ring onto the tile
bridge rails.
To secure the ceiling speaker to the ceiling tile
1. Place the tile bridge on the ceiling tile and insert
the lip of the tile bridge ring into the ceiling tile
hole.
2. Pull off the speaker grille from the front of
the speaker with the included wire hook.
Tile bridge ring
Tile bridge rails