SMART 6806800K30J, Инструкция по установке и использованию

Страница: 21 / 50

RTM-ATCA-F125 Installation and Use (6806800K30J) 21
Chapter 1
Introduction
1.1 Features
The RTM-ATCA-F125 provides the I/O connection for the ATCA-F125 switch blade towards
the back of the system. RTM-ATCA-F125 is directly connected to and powered by the front
board.
The RTM-ATCA-F125 is a rear transition module (RTM) as defined in PICMG 3.0 Revision
3.0 Advanced TCA Base Specification and PICMG 3.1 Revision 1.0 Specification
Ethernet/Fiber Channel for AdvancedTCA Systems. It provides several Base and Fabric
Channel Ethernet interfaces connected to the front board through the Zone 3 connector.
The main features of the RTM-ATCA-F125 are:

Single slot RTM form factor (70mm x 322mm)

6x 10 Gbit Ethernet uplinks (FIX) according to IEEE 802.3ak with 6 SFP+ type
connectors

2x 10 Gbit Ethernet uplinks (BIX) according to IEEE 802.3ak with 2 SFP+ type
connectors

4x 1 Gbit Ethernet interfaces (BIX) with 4 SFP type connectors

Serial EEPROM accessible by front-blade IPMC

Four status LEDs and ejector handle switch accessible by front-blade IPMC
1.2 Standard Compliances
The product is designed to meet the following standards.
Table 1-1 Standard Compliances
Standard Description
ANSI Fire Spread Criteria
The product is designed to pass the ANSI T1.319-2002 fire
spread test method as well as the NEBS GR-63-CORE fire
spread test method.
AS/NZS CISPR 22 Class A
(Australia/New Zealand)
The product complies with AS/NZS CISPR 22 Class A
(Australia/New Zealand), Limits and Methods of Measurement
of Radio Disturbance Characteristics of Information Technology
Equipment.
AT&T Document ATT-TP-76200
The product is designed to comply with the latest version of the
AT&T Document ATT-TP-76200: Network Equipment Power,
Grounding, Environmental, And Physical Design Requirements.