-9-
Powering Up
1.
Inspect the power and umbilical cables for damage.
Ensure that the cables will not interfere with the
moving door or the drive unit.
2.
Connect to power. The opener will perform a software
check before displaying the firmware version (Fig. 7).
3.
The LCD will then display
Positions Not Set
(Fig. 8).
Menu Navigation
l
Use the
CODE
button to cycle up through menu
preferences and parameters.
l
Use the
MENU
button to cycle through menu
preferences and parameters.
l
Press the
SET
button to confirm selection and move to
the next menu item.
l
Pressing
MODE
at any time will store changes and exit
to main screen.
To enter
limits
set up press
SET
.
To enter
parameter
settings press
MENU
.
Setting Motor Installation
1. Press
SET
for 3 secs to enter set up. The display will
show
Right Hand Installation
(default)
Fig. 10. If this is correct (when standing inside looking
out) press
SET
to confirm.
Option:
To change to
Left Hand
(Fig. 10) press
MENU
then press
SET
to confirm.
The opener will now go into limits set up.
Note:
To set limits via transmitter please refer to page 14
for Coding Transmitter instructions.
Smart Openers
SC Vx.xx
Positions
Not Set
Right Hand
Installation
Left Hand
Installation
Fig. 7
Fig. 8
Fig. 9
Fig. 10
© June 2009 Smart Openers Pty Ltd