-12-
Setting Motor Open and
Close Speeds
If required the opening and closing speed can be reduced
in 5% steps down to 50% to suit the site.
(Factory Default = 80%).
1.
Press
MENU
for 3 secs then press
SET
to cycle
through to
Open Speed
or
Close Speed
as
required.
2.
Press
MENU
to cycle through from 80% down to 50%
in steps of 5%. Once 50% is reached the next press
of the
MENU
button will return to 100%.
3.
When desired speed percentage is reached press
SET
to confirm and move to next item or press
MODE
to exit to normal operation.
Setting Photo Beam Mode
Note:
A functioning photo electric safety beam must be
installed and Photo Beam Mode set to ON to enable
auto-close function.
Photo Beam Mode allows the door to close once the
beam has been tripped and restored. Smart Openers
strongly recommend the installation of a PE safety beam
to protect persons and property (Factory Default = Off).
1.
Connect PE beam cable to controller terminal black
as per Fig. 21.
2.
Press
MENU
for 3 secs then press
SET
to cycle
through to
Photo Beam
.
3.
Press
MENU
to choose
On
.
4.
Press
SET
to confirm and move to next item or press
MODE
to exit to normal operation.
M2 Open Limit
Com
M2 Close Limit
M1 Open Limit
Com
M1 Close Limit
Com
Photo Beam 2
Photo Beam 1
+24V
Lock +
Lock -
Fig. 21
Open Speed
80%
Close Speed
80%
Photo Beam
On
Fig. 19
Fig. 20
Fig. 20
© June 2009 Smart Openers Pty Ltd