Page 9
SmartSoft for SmartScan Software Installation
The SmartScan SBI + PM can be configured and controlled using
SmartSoft
application software. This
software also allows data to be acquired from the interrogator.
SmartSoft
can be downloaded from the
web, see Appendix A.
An instruction manual for the installation and operation of
SmartSoft
is provided at Appendix A.
Switching on the Interrogator
Once the equipment has been connected as shown in Figure 2 and SmartSoft has been installed on the
host PC, the Interrogator is ready to be switched on by applying the DC input voltage.
The SmartSoft PC application should now be used to configure and acquire data from the interrogator.
Switching off the Interrogator
The interrogator may be switched off by disconnecting the DC input voltage.
Maintenance
The SmartScan SBI contains no user serviceable parts. Many reported issues are as a result of poor optical
connector cleanliness. You are recommended to refer to Appendix D, where best practices for optical
connector cleaning are provided.
In the event that you are having problems with your instrument, please contact your local representative
or Smart Fibres technical support at +44 1344 484111 or
. In the event that technical
support are unable to resolve your issues remotely, you will be given a Return Material Authorisation
(RMA) number under which you can return the instrument for maintenance or repair.
