Installation and Operation
-
9-
7. Selecting Relevant Sources and Using ‘Show Me’ Button
7.1
On the base of the unit, there is a button labelled ‘Input Selection’. By
pressing this button the unit will cycle through the inputs in
succession.
7.2
Green LEDs on the side of the unit alight corresponding to the
active input, simply continue to press the button until the correct
LED and Video source are selected (For RGB 2 both the Y/C &
CVBS LEDs will be alight).
7.3
By pressing the ‘Show Me’ button the Blue LED will alight on the side
of the currently active unit.
