2. Connecting SLX-RX212 to audio and Infra-Red control
2.1
Connect the speakers or audio inputs on the displays to the audio
outputs on the receiver, using 3.5mm jack plugs.
2.2
If using the receiver to transmit Infra-Red signals back down the
cable to the transmitter unit then connect an ‘eye’ to the jack
position as shown in the diagram below.
2.3
If using the receiver to transmit Infra-Red signals up to the display
from the transmitter unit then connect a ‘LED’ to the jack position
as shown in the diagram below.
Please note: connecting the IR ‘eye’ will prevent the return RS232 path from the display
Installation and Operation—SLX-RX212/D
-
24-
