Installation and Operation
3. Connecting the Audio, Infra-Red & RS232 Control panel (optional)
3.1
Connect the Audio from the Source devices to the relevant 3.5mm
minijack sockets (see diagram below), using a Smart-e interface
cable if necessary.
3.2
If appropriate connect the IR emitter LED into the relevant 3.5mm
minijack socket and position the IR LED upon or near the IR window
on the device to be controlled.
3.3
If using an RS232 control panel, connect the panel to the relevant
3.5mm minijack socket, using a Smart-e Interface cable if necessary.
-
5-
