SMART Board In-WallRear Projection Interactive Whiteboard, Руководство по установке

Страница: 41 / 69

Preparing Your Interactive Whiteboard for Use 35
Calibrating the Cameras
Digital cameras in the corners of the interactive screen track objects like your finger or a pen tray
pen. Each camera is calibrated to recognize the position of a pen tray tool or your finger on the
screen’s surface and to send this information to SMART Board software. The software then
interprets the information as mouse clicks or electronic ink in the appropriate location.
If the cameras become misaligned for any reason, you may experience “broken ink” (gaps in your
writing), or an area of the screen may become unresponsive to your touch.
Fortunately, this problem is easily fixed by performing a simple calibration procedure, as described
below.
1. Press the SMART Board icon in the system tray (Windows computers) or in the Dock (Mac
computers) and select Control Panel .
2. Press SMART Board Settings .
3. From the Hardware Info & Settings list, select Advanced Settings .
The Edit Advanced Board Settings dialog box appears.
4. Press the Calibrate button.
The 4-point calibration screen appears.
5. Press the center of each target with a pen tray pen and hold it there until the target moves.
After you press the final target, the orientation screen appears.
6. Complete the 4-point orientation.
7. Press OK .
To calibrate the cameras